Skip to main content

ScoreLink 2 Device in Local Mode

On this page

    To proper connect your ScoreLink 2 Device in Local Mode, here are the steps that you need to follow:

    1. ScoreLink 2 is connected to the network.
    2. ScoreLink 2 is connected to the ScoreBoard Controller.
    3. Your PC is connected via hardwired to the same network, ScoreLink device is connected to.
    4. TCP Ports 1400 to 1410 are open in the network and ScoreLink's MAC Address is whitelisted. (Please contact your IT Department to help on this)
    5. Make sure ScoreConnect 3 is installed in your computer. If it is not, please install it using the following link: https://download.sportzcast.net/products/ScoreConnectIII.1.1.7.51.exe
    6. Open ScoreConnect 3.
    7. Go to the Settings Tab.
    8. Click on Find Bots and search for the ScoreLink's number is the drop down menu below.
    9. Select Vendor, Sport and Connection Type between ScoreBoard Controller and ScoreLink device.
    10. Select the decoding Locally and click on "Submit".                                                                     

    If you encounter any issues or have any questions, please contact support at Sportzcastcs@geniussports.com or call 321-888-3800.